Alcatel 1000 ADSL Especificações

TS®1000TS®1000TS®1000TS®1000ADSL Test SetADSL Test SetADSL Test SetADSL Test SetUsers GuideUsers GuideUsers GuideUsers Guide

73. Moving the cursor (*) beside each option, the user canmodify the amount of time that the TS1000 tries tonegotiate with an ATU-C (Negotiated) and t

83. Press the right arrow button to start the test. The TS1000will attempt to negotiate with the ATU-C. If an ATU-C can-not be found, the test will ti

9There is a possibility to have one more screen appear on theTS1000 after the Op.Mode: result. This is entirely dependentupon whether or not the ATU-C

10Capac: Displays the capacity of the line. This is the ratio ofachieved bit rate (B/Rate or IntB/R) over the maximum attain-able bit rate. Results a

11ITU rev.#: Displays the ITU Standard revision number. Thisresult will only appear if the manufacturer’s ATU-C supports thisfeature.Care must be take

12The user can then choose from three options: Send to PC,Send to Printer or Save in Memory. An explanation of each isgiven below.1. Send to PC:The TS

133. Save in MemoryThis function saves the results of up to 12 tests. Move the cur-sor (*) to the Save in Memory position and press the right arrowkey

14Viewing Saved DataThe TS1000 is able to save up to 12 results. To recall any ofthe saved data, move the cursor (*) to the View Resultsoption of the

15the NULL modem cable. If the connection is successful, astatus bar will indicate the progress of the download. Oncecom-pleted, the TS1000 will reset

16WARRANTYHarris warrants that the TS1000 Test Set shall be free of anydefects in parts or workmanship, for a period of 18 months andthe line cord for

No part of this publication may be reproduced, stored on a retrieval system, or transmitted, in any form or by any means electronic, mechanical, photo

Note: Do not use RS232 port when unit is connected to the ADSL line.Harris Corporation | 809 Calle Plano | Camarillo, CA 93012-8519 USAwww.harris.c

iContents GENERAL INFORMATION 1 DESCRIPTION 1 Packing List 1 Physical Characteristics 1Keypad Controls and Indicators 2 OPERATION 3Testing

1GENERAL INFORMATIONThis document provides the user with operating information forthe TS ® 1000 ADSL Test Set manufactured by Harris Corpora-tion, Cam

2Figure 1. Physical CharacteristicsKeypad Controls and IndicatorsKeypadBacklight: The ON/OFF button located on the upper left handside of the unit is

3RS232 DB-9: Used to update software or firmware. Use astandard off the shelf NULL modem cable for the proce-dure. See “Updating Firmware/Software” fo

4Figure 2. Connecting to a LineUsing the RJ-45 to dual telco clip and the RJ-11 Cable, insertthe RJ-45 connector into the TS1000. The telco clips and

5If you are testing after the POTS splitter at the customer pre-mises, you will need to address a different connection config-uration. The POTS splitt

6The following information will be displayed.Appl. Ver.: Displays the current software version of the TS1000.Modem Ver.: Displays the Alcatel firmware