Alcatel OS6602-48 Guia do Utilizador descarregar pdf (Página 218)

100

101

Quick Steps for Configuring Static Link Aggregation Configuring Static Link Aggregation

page 11-4 OmniSwitch 6600 Family Network Configuration Guide April 2005

Note. Optional. You can verify your static link aggregation settings with the show linkagg command. For

example:

-> show linkagg 1

Static Aggregate

SNMP Id : 40000001,

Aggregate Number : 1,

SNMP Descriptor : Omnichannel Aggregate Number 1 ref 40000001 size 4,

Name : ,

Admin State : ENABLED,

Operational State : UP,

Aggregate Size : 4,

Number of Selected Ports : 4,

Number of Reserved Ports : 4,

Number of Attached Ports : 4,

Primary Port : 1/1

You can also use the show linkagg port port command to display information on specific ports. See

“Displaying Static Link Aggregation Configuration and Statistics” on page 11-18 for more information on

show commands.

An example of what these commands look like entered sequentially on the command line on the local

switch:

-> static linkagg 1 size 4

-> static agg 1/1 agg num 1

-> static agg 1/2 agg num 1

-> static agg 1/3 agg num 1

-> static agg 1/4 agg num 1

-> vlan 10 port default 1

And an example of what these commands look like entered sequentially on the command line on the

remote switch:

-> static linkagg 1 size 4

-> static agg 1/9 agg num 1

-> static agg 1/10 agg num 1

-> static agg 1/11 agg num 1

-> static agg 1/12 agg num 1

-> vlan 10 port default 1

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 627 628

Comentários a estes Manuais

Sem comentários

Alcatel OS6602-48 Guia do Utilizador Página 218

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Alcatel OS6602-48